site map
CNC Router - Videos
This is the section with the videos for the CNC project.
Go to CNC pictures
(
You
Tube
)
Gantry Mockup
- Linear Bearings have been installed on the sides of the gantry.
(
You
Tube
)
Controller and Steppers
- The whole electronic part is up and running.
(
You
Tube
)
Gantry
- The gantry is finished and installed.
(
You
Tube
)
Y Axis Mockup
- Linear bearings have been installed on the sides of the Y Axis.
(
You
Tube
)
Y Axis
- It is done except the rails for Z axis.
(
You
Tube
)
Y Axis
- It is done with the Z rails in place. Vibration test.
(
You
Tube
)
Z Axis
- Almost done. It's missing only the router support.
(
You
Tube
)
Axis Mockup
- Testing the driving mechanism on a test bed.
(
You
Tube
)
X Axis (gantry)
- The gantry is up and running. First real CNC test. ...One axis for now.
(
You
Tube
)
X&Y Axis
- A test with both X & Y axis runing. Drawing a Mach3 sample.
(
You
Tube
)
X, Y, Z Axis
- A test with all axis runing. Last one before going live.
(
You
Tube
)
Live test
- The first live test.
Go to CNC pictures